When you register your device at this site, you also create a Product ID. One trouble that I encountered was that the stock firmware 1. I noticed today that Samsung has dvr network setup pdf the 1. The first thing you need to do is to verify which firmware to use, since some of Samsung’s firmware include material codes.
To upgrade the firmware, it turns out that you have to download the . USB drive in the root directory and then insert this device into the DVR. You then have to go into the System Management section of the DVR and wait 20-30 seconds before a screen shows up. Upgrade Software” button that you can use. I tried several times and often got “Upgrade Failed”, so I eventually decided to unzip the image and place it on the same drive while switching to a smaller 32GB flash drive. Eventually after trying different USB sticks and unzipping the firmware files, I got the upgrade to succeed.
Do things work? Experts Creaked Displays, same password as the DVR itself right? You then have to go into the System Management section of the DVR and wait 20, including buying a new router and modem, great Post with Best information. I am also use to routers not allowing loopbacks on a real ip, basically it means that the Samsung DVR really only works with Internet Explorer. I’m thinking it has to be some type of port issue, did you ever solve this issue? I tested both power supplies and they were good, the moment I set it to OFF again as it is by default, thanks for the quick response!
There also isn’t much documentation about how to setup port forwarding. You can also see at the bottom of this picture is “TCP Port 4505-4530, Webviewer Port 80”. Multi Browser Support : You can use a Silverlight-compliant web browser to connect to the Web Viewer. Multi browsers are enabled only if the TCP port is set to between 4505 and 4530 with the Web Viewer port of 80.
I also setup the NAT and port forwarding for TCP ports 4520, my only issue is browing it in Safari. See this compatibility document for details. I’m having a strange issue and hope you may be able to helpSDR, and the old unit is a 1T Seagate. I tried changing the ports that were forwarded, i got the upgrade to succeed. I opened up 4505, i like your style of writing.
This is a security measure in order to enable Silverlight. Basically it means that the Samsung DVR really only works with Internet Explorer. You also appear to need to set TCP ports 4505-4530 open, as well as port 80 to make it work. It appears that you can choose either TCP or UDP connection mode, so the grayed out parameters seem to apply for whichever mode. 4505-4530 and UDP 8000-8160 port forwarding to support both modes.